Repair Guides
In-depth guides are on the way. In the meantime, these quick-read articles will help you understand what's going on with your appliance.
Quick guides from Atech Repair Service to help you understand what is wrong with your appliance before calling a technician, with the most common causes of each fault.
A refrigerator that stops cooling usually has a failed evaporator fan, a defrost problem causing ice
Water under or inside a refrigerator most often comes from a clogged defrost drain, a cracked water
When a refrigerator ice maker stops, check that the arm or switch is on and the freezer is at 0°F. B
A freezer that won't freeze but still runs usually has a defrost failure, a dead evaporator fan, a l
Standing water in a dishwasher is usually caused by a clogged filter or drain hose, a failed drain p
Dishes coming out dirty point to blocked spray arms, a weak wash motor, low water fill from a bad in
A washer that won't spin often has an unbalanced load, a failed lid switch or door lock, a worn driv
Water left in a washer usually means a clogged drain pump filter, a sock or coin in the pump, a kink
A dryer that tumbles but doesn't heat usually has a blown thermal fuse (often caused by a clogged ve
Long drying times are most often caused by a lint-clogged exhaust vent, a partially failed heating e
An oven that won't heat typically has a failed bake element or igniter, a bad temperature sensor, a
A single burner that won't work usually has a bad surface element, a failed infinite switch, a dirty
A microwave that runs but doesn't heat usually has a failed magnetron, high-voltage diode, capacitor
Standalone ice machines from Scotsman and U-Line stop producing when the water supply or filter is r
New or loud noises usually mean a specific worn part: a refrigerator fan hitting ice, a washer beari
Frequently asked questions
Ready to get it fixed?
Request service online or call — we'll take it from there.